Enterasys-networks ANG-1000 Manuale Utente Scaricare il pdf (Pagina 20)

Aurorean Network Gateway-1000 User’s Guide

Connecting Power to the ANG-1000 Chapter 2

Installation

A switching power supply including a 6’ power cord and a 7’ electrical cord

with an attached power supply is supplied with each system. To connect

these items to an ANG-1000, perform the following steps:

1 Plug the power supply cord into the system’s power socket as shown

in Figure 8.

Figure 8 Connecting AC Power on the ANG-1000

2 Plug the correct end of the AC power cord into the power supply and

the other end into a grounded AC outlet or UPS as shown in Figure 9.

The front Power LED will light the moment you power up the unit.

Figure 9 Connecting the Power Cable to the Power Supply

NOTE

International customers may swap the electrical cord segment shipped

with the ANG-1000 for a cord that meets the proper standard for their

country. A custom cord can be inserted in the power supply.

Power supply cable

Power supply

AC power cord

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 69 70

Nessun commento

Enterasys-networks ANG-1000 Manuale Utente Pagina 20